Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 33

Satellite Receiver
and VCR
See page 23.
Toconnecta satellite receiverand VCR
1
Connect the CATV cable to the single (input) jack of the splitter.
2 Use _-_ c oaxial cable to connect one of the splitter's two output
jacks to the rFV's CABLE jack.
3 Use _ coaxial cable to connect the splitter's other output jack to
the satellite receiver's VHF/UHF input jack.
4 Connect the satellite _ntenna cable to the satellite receiver's
satellite input jack.
5 Use a coa×ial cable to connect the satellite receiver's VHF/UHF
output jack to the VCR's VHF/UHF input jack.
6 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8 Run Auto Program, as described in "Setting Up the Channel List"
on page 45.
Splitter
(not supplied)
AtV cable
6
LVI_h]
AtV cable
7
CATV
cable
L Satellite antenna
3 . cable
Coaxial / A
cable _ HI'
,io,oo oD,o v,o o []
Cal)les are often
5 €oRot=codedto connectors.
Connect red to red,
white to white, etc.
AUDIOR ASDIOL VIDEO
_ble
/
i,E,,
IN
W