Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 88

Notes on Using This Connection
Set up a digital For digital i.LINK devices (devices that require only
i.LINK device the i.LINK connection), no setup is necessa_ T. The TV
automatically recognizes the device as soon as the
connection is made.
Set up an i.LINK I Connect analog A/V cables to the, VIDEO 3 input
device that supports (see page 86).
an EIA-775A analog 2 Use the i.LINK Control Pane! to activate the analog
connection connection to your i.LINK device (see page 91).
Noteson Connectingi.LINKDevices
To connect two or more i.LINK devices, use i.LINK cables to connect
them as shown below.
i,LLNK LLLNK i,LINK [,LINK
You can connect up to 63 i.LINK devices. However, the maximum
number of cables in any serial route is 16.
i,LINK
LL_NK LLINK [,L_NK
LLtNK i.LtNK
Do not connect i.LINK devices in a way that creates a
loop.
i,LtNK
LLINK LLINK
Connecting non-compatflvle devices, such as PCs or PC peripherals,
,nay result in malfunctions.
87