Sony FD Trinitron WEGA KD-34XBR960 Operating Instructions Manual page 22

Cable Box Only
For best results, use this connection if:
[] Your cable TV company scrambles all cham_tels, which requires
you to use a cable box.
[] You do not have a VCR. (If you have a VCR, see pages 24 and 26.)
With this connectionyou can:
[] Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection, all channels come into the TV through your cable box and only one
unscrambled signal is sent to the TV: so you cannot use the dua! picture features.. If
some of your channels are scrambled, but others are not, consider using the "Cable Box
and Cable" connection on page 20 instead.
Toconnectthe cablebox
I
Connect the CATV cable to the cable box's input jack.
2 Use a coaxial cable to connect the cable box's output jack to the
CAW Coaxial cable
cable
| |
VHF/UHF _I_
3
Run Auto Program, as described in "Setting Up the Channel List"
on page 45.
Notes on Using This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually cham-_el 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control See "Programming the Remote Control" on
to operate the cable box pages 51.
Activate the remote control to Press SAT/CABLE FUNCTION.
operate the cable box
21