Haier HD80-A3939E-S User Manual page 76

WARNING
Don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME SELECTOR with
OFF position
Rotating the programme selector in both

directions it's possible to select the
desired drying programme.
To cancel the selections or switch off the

appliance rotate the programme selector
on OFF (remember to unplug the appliance).
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
To start the selected cycle with the preset

parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, if you want to modify the chosen

programme, press the desired options buttons,
modify the default parameters and then press
START/PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
After switching on the appliance, wait a

few seconds for the programme to start
running.
PROGRAMME DURATION
When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
the machines
76
Once the programme has started you will

be kept informed constantly of the time
remaining to the end of the drying cycle.
The appliance calculates the time to the

end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to the
humidity level of the load.
PROGRAMME END
"END" will appear in the display and it will
stay fix for 2 minutes at the end of the
programme. After that the machine will turn
OFF automatically.
The programme
ALWAYS be put in the OFF position at
the end of the drying cycle before a
new one can be selected.
PAUSING THE MACHINE
Keep the START/PAUSE button pressed

for about 2 seconds (the residual time
display will flash, showing that the
machine is paused).
Press the START/PAUSE button again to

re-start the programme from the point it
had been paused at.
CANCELLING THE SET PROGRAMME
To cancel the programme you should turn
OFF the appliance.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, by pressing the
START/PAUSE button, the machine will
restart from the beginning of the phase it
was in when the power was lost.
ANTI-CREASE button
ANTI-CREASE function is designed to help

remove wrinkles of clothes. The drum will
rotate after the drying cycle to stretch
clothes so there is no need to worry about
forgetting to take out clothes. When the
selector must