Haier HD80-A3939E-S User Manual page 62

Heat pump tumble dryer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 60
The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.
WARNING
Do not use the product if the
fluff filter is not in position or
is damaged; fluff could be
ignited.
Lint and fluff must not be allowed
to collect on the floor around the
outside of the machine.
WARNING
Where
the
symbol
temperature
operation
of
dryer may be in excess of 60
degrees C.
Always remove the plug before
cleaning the appliance.
The drum inside may be very
hot. Always allow the dryer to
complete the cool down period
before removing the laundry.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
hot
surface
is located the
rise
during
the
tumble
62
items are left at a temperature
that ensures that the items will
not be damaged.
WARNING
Never stop a tumble dryer
before the end of the drying
cycle unless all items are
quickly removed and spread
out so that the heat is
dissipated.
WARNING
During transport ensure that
the dryer is in an upright
position, if it's necessary
you can only flip in the side
shown.
If the product is in different
side, wait at least 4 hours
before switching on so that
the oil can flow back into the
compressor. Failure to do
this could result in damage
to the compressor.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hd90-a3939e-sHd90-a3939re-s

Table of Contents