Table of Contents
Advertisement
Determine your rebound setting based on the
air pressure. Turn the rebound adjuster back
anti-clockwise by the number of clicks
specified in the table below:
Air pressure (psi)
Recommended rebound setting
< 100
Open (anti-clockwise)
100 - 120
120 - 140
140 - 160
160 - 180
180 - 200
200 - 220
220 - 240
240 - 260
260 - 280
280 - 300
Table 54: Filling pressure table for the FOX air fork
6.3.9
Retracting the brake linings
Disc brakes require wearing-in time. The braking
force increases over time. You therefore need to
be aware that the braking force may increase
during the wearing-in period. The same happens
after brake pads or discs are replaced.
Accelerate pedelec to about 25 km/h.
Brake pedelec until it comes to a halt.
Repeat process 30–50 times.
The brake linings and brake discs are now
retracted and provide optimal braking power.
MY20H01-42_1.0_21.06.2019
11
10
9
8
7
6
5
4
3
2
Operation
62
Advertisement
Table of Contents
