Table of Contents
Advertisement
2. Pull convertible top fins B on the driver and pas-
senger sides out of fin tensioners C.
3. Fold fin tensioners C down on the driver and
passenger sides until they engage perceptibly.
Fig. 19: Insert convertible top fins in brackets
4. Lightly press convertible top fins B on the driver
and passenger sides into the brackets D and fold
down until they engage.
Removing weather barrier
b Convertible top fins slackened
1. Open tailgate and doors.
Fig. 20: Remove side parts
2. Pull the driver and passenger side parts A out
of the upper retaining clip on the convertible top
rod B, remove upwards and place on the rear
shelf.
Opening and Locking
Fig. 21: Detach fastening buttons
3. Detach fastening buttons.
4. Spread the weather barrier straight on the rear
shelf.
5. Fold the left side of the weather barrier over to
the right until the crease rests on the left side of
the window glass.
6. Fold the weather barrier in half again to the left
so the left side part is at the left edge of the
window glass, but does not protrude beyond it.
7. Repeat steps 5 and 6 on the right side.
41
Advertisement
Table of Contents
