Table of Contents
Advertisement
4. If the Bluetooth® code in the phone or smart-
phone matches, confirm. If required, enter the
PIN of the SIM card in PCM. (country-depend-
ent)
�� If the device has been successfully con-
nected, it is displayed in the device over-
view.
For info about managing Bluetooth® devices:
g Refer to chapter "Connecting a phone via Blue-
tooth®" on page 166.
Device Manager settings
Information on externally connected devi-
ces
Technical data on supported media and file formats:
–
Refer to chapter "Porsche Communication Man-
agement (PCM)" on page 257.
–
If a storage device contains a large number of
files, folders or playlists, it may take longer to
load media tracks for the first time.
–
During playback, audio files are automatically
displayed with additional saved information (e.g.,
artist, track, album cover). If this information is
not available on the medium in question, the
Gracenote® database is queried. Nonetheless, in
certain cases it is not possible to display some
additional information.
–
Do not use USB extension cables or adapters.
These impair functionality.
–
USB hubs are not supported.
–
Porsche assumes no liability for damaged or lost
files or media.
Never store important data on the SD cards,
Jukebox or portable players.
–
Music tracks created for use on MP3 players
are generally covered by copyright in accordance
with the relevant national and international regu-
lations. Many countries do not allow copies to be
made, even for personal use, without the prior
consent of the copyright holder. Please observe
the applicable copyright regulations. If you hold
these rights, e.g. for your own compositions and
recordings, or have been granted these rights by
the copyright holder, these restrictions do not
apply. The applicable laws apply in all cases.
Inserting an SD card
NOTE
Risk of damage to PCM by incorrect use of SD cards.
If using a SIM card adapter, there is a risk of the SIM
card falling out due to vibrations and components of
the card getting stuck in the SD reader.
e
Only use single-component SD cards.
Fig. 130: SD card slot
A
SD card reader 2
Operation and use
B
SD and SIM card reader cover
C
SD card
D
SD card reader 1
Inserting an SD card
1. Use a finger nail to fold up the cover over the
slot B (Fig. 130).
2. Push SD card C (Fig. 130) with the printing
upward into SD card reader (A (Fig. 130)) or
( D (Fig. 130)) until it engages.
Removing an SD card
b SD and SIM card reader cover open.
1. Press on the inserted card and remove it.
2. Close the SD and SIM card reader cover.
Inserting and removing SIM cards
g Refer to chapter "Connecting & pairing vehicle" on
page 176.
147
Advertisement
Table of Contents
