Table of Contents
Advertisement
Roadside Assistance
Prepare wheel assembly
Before the wheel is fitted, the components involved
must be cleaned, checked and, in some cases,
greased. Visit an authorized Porsche dealer. Porsche
recommends an authorized Porsche dealer, as they
have trained technicians and the necessary parts and
tools.
Check central bolt
Fig. 201: Check the conical ring
e
Cone ring C (Fig. 201) must be able to be
turned in the central bolt without great resist-
ance or jerking. If turning is almost impossible,
grease the inside of the central bolt again. Visit
an authorized Porsche dealer. Porsche recom-
mends an authorized Porsche dealer, as they
have trained technicians and the necessary parts
and tools.
232
Fig. 202: Check anti-loss device
e
Loss protection D (Fig. 202) must turn clock-
wise. It clicks like a safe lock.
e
Anti-loss device D (Fig. 202) must not turn
counter-clockwise. Irregular clicking, delayed
locking, skipping, or jamming indicate damage to
the anti-loss device. Never use this central bolt.
Fig. 203: Check safety bolts
e
The safety bolt E. (Fig. 203) Push about an inch
into the screw. When you let go, the bolt must
snap back. Jamming indicates damage to the
anti-loss device. Never use the central bolt and
the anti-loss device.
Advertisement
Table of Contents
