Table of Contents
Advertisement
Instrument panel display
Message on the multifunction display
Gear lever position display
flashing
Gear lever position display
flashing
1. Porsche recommends an authorized Porsche dealer, as they have trained technicians and the required parts and tools.
Transmission failure
Parking vehicle safely
Transmission is overheating
Park vehicle to cool down
Transmission fault
possibly no R gear
Driving permitted
Transmission temperature too high
Reduce load
Meaning and action required
Transmission failure.
Gear lever position is no longer displayed in the instrument panel.
The vehicle can be driven only until it comes to a stop.
Continued driving not permitted.
e
Immediately stop when it is safe to do so.
e
Have the vehicle towed to an authorized Porsche dealer.
g Refer to chapter "Towing and tow-starting" on page 198.
Transmission temperature too high.
e
Immediately stop when safe to do so and let the transmission cool down.
e
Have the fault rectified by an authorized Porsche dealer.
Transmission is faulty.
Reverse gear may not be available.
Driving permitted with restricted gearshift comfort.
e
Have the fault rectified by an authorized Porsche dealer.
Transmission temperature too high.
Driving permitted. "Warning jerks" can be felt when driving off and the engine
power may be limited.
e
Stop when it is safe to do so.
e
Reduce engine load.
e
Do not hold the vehicle using the accelerator pedal, but rather using the
brake.
e
Allow the engine to run in gear lever position P or N until the warning
disappears.
Display and input
1
1
135
Advertisement
Table of Contents
