Changing The Basic Set- Tings; Programme Counter; Calling Up The Programme Counter; Cleaning And Servicing - Siemens WM14VG43 User Manual And Installation Instructions

Table of Contents

Advertisement

en Programme counter
16.2 Changing the basic set-
tings
To call up the basic settings for
1.
the sub-menu, press and hold both
buttons Einstellungen 3 Sek. for
approx. 3 seconds.
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 39
Adjust the basic setting.
3.
Press Einstellungen 3 Sek. to call
4.
up the main menu.
17 Programme counter
The program counter displays the
number of finished programmes.
17.1 Calling up the pro-
gramme counter
Press and hold the two Einstel-
1.
lungen 3 Sek. buttons for approx.
3 seconds.
Press .
2.
40
18 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum Clean programme
without laundry and with a cleaning
agent for caring for the inside of
the appliance
→ "Accessories", Page 32 or with
washing powder that contains
bleach.
18.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.

Advertisement

Table of Contents
loading

Table of Contents