Table of Contents
Advertisement
Slide the measuring aid forwards.
2.
Fold the measuring aid down and
3.
click it into place.
Push in the detergent drawer.
4.
13.8 Adding detergent and
care product
Notes
Do not use the measuring aid for
¡
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Observe the information about de-
¡
tergents and care products
→ Page 33.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.9 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 33
Press Start/Nachlegen.
▶
The drum rotates and load detec-
a
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
The display shows the programme
a
duration or the programme end
time.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Start/Nachlegen.
1.
The appliance pauses.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Nachlegen.
5.
13.11 Cancelling the pro-
gramme
Press Start/Nachlegen.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse/Freshen Up pro-
gramme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 27
Remove the laundry.
3.
→ "Unloading the laundry",
Page 36
operation en
35
Advertisement
Table of Contents
