Changing The Basic Set- Tings; Cleaning And Servicing; Cleaning The Drum; Cleaning The Detergent Drawer - Siemens WG44G2ZADN User Manual And Installation Instructions

Table of Contents

Advertisement

15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1. → Page 32
Press
 and, at the same time,
2.
turn the programme selector to po-
sition 2.
The display shows the current
a
value.
Use the programme selector to se-
3.
lect the required basic setting.
→ Page 32
To change the value, press
4.
To save the changes, switch off
5.
the appliance.

Cleaning and servicing

16 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Tromlerengøring pro-
gramme without laundry but with
washing powder that contains oxy-
gen bleach or a a cleaning agent
for caring for the inside of the ap-
pliance.
→ "Accessories", Page 28
16.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
.
Pull out the insert upwards.
3.
Cleaning and servicing en
drawer
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg44g2zkdnWg44g2zidn

Table of Contents