Yamaha YSP-800 Owner's Manual page 42

Once an input source is selected (see page 37), you can
play back the selected input source.
This section uses a DVD player as an example of the playback
source.
"4(--
Fur details on the TV and the DVD plwer you are using, refer to
the owner's manual supplied with the TV and the DVD player.
1 Turn on the power of your DVD player using
the remote control supplied with the DVD
player.
2
Switch to the video input on your TV using
the remote control supplied with the TV so
that the DVD menu screen is displayed.
3 If necessary, turn down the volume of your
TV until you cannot hear any sound.
4
Press DVD on the remote control to select
DVD as the input source.
5 Play back the DVD on your DVD player using
the supplied remote control.
Audio signals froln your DVD player are output from
the speakers of this unit.
• If the uutput volume is tou luw. increase the volume on this unit
to around 25 dB.
• If you have set the apprupriate remote control codes lor your
TV and DVD plwer, yuu can use the remote control supplied
with this unit to operate these components. For details on how
tu set remote cuntrol codes, see page 82.
Press VOLUME +/- on the front panel or on the
remote control to increase or decrease the
volume level.
The numeric value of the volume level appears in the front
panel display.
Control range: 0.0 dB to -99.5 dB, MIN (minimum)
Front panel
or
VOLUME
Remote control
rOE
_,..: ! ..,!L.. i.,.!_'Ji2_ "r _;.._ = _ _:.2 L.I !.,,_ .=.==_
VOLUME MUTE appears at the minimum vohnne level.
U0 L LIHE H iiii..i
• The volunm level of all input sources (including multi-channel
as well as stereo sources) changes at the same time.
• 0.5 dB uf the volume level increases or decreases each time you
press VOLUME +_.
• Yuu can continuously increase or decrease the volume level if
you press and hold VOLUME +1 .
38