Yamaha YSP-800 Owner's Manual page 32

l_lql'l-1-'illl +
Example of using the supplied cardboard
microphone stand
Once the optimizer microphone is firmly connected to this
unit and properly placed in your listening room, tUllow the
procedure below to start the AUTO SETUP procedure.
• Assembling the supplied cardboard
microphone stand
You w,ill find three separate parts (one circular-shaped part
and two longitudinal-shaped parts) of the cardboard
microphone stand originally put together.
1 Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal-shaped part
into the crevice of the other longitudinal-
shaped part.
3 Place the circular-shaped part on top of the
two combined longitudinal-shaped parts.
4
Place the supplied optimizer microphone on
top of the circular-shaped part.
28