Yamaha YSP-800 Owner's Manual page 16

• Detaching the metal apparatus from the
rear panel
A metal apparatus is attached to the rear panel used for
packing purposes. If the metal apparatus is a nuisance
when you install this unit, you can detach it from the rear
panel.
• Using astand
You can mount your TV on the stand placed on a
connnercially available rack to install this unit under your
TV.
Stand
• After you detach the metal apparatus li'om the rear panel, drive
the screws back in using a screwdriver.
• When you transport this unit. the metal apparatus must be
attached to the rear panel of this unit.
• Using a metal wall mount bracket
You can use the optional metal wall mount bracket to
mount this unit on the wall in your listening room.
Metal wall mount bracket
This unit
TV
1
Relcr to the instructions supplied with the metal bracket for
details on how to attach the metal bracket to the wall or how to
attach this unit tu the metal bracket.
TV
This unit
Refer to the instructions supplied with the stand lbr details on
how to install the stand or how to mount this unit and the TV on
the stand.
• Using a rack
You can install this unit either above or under your TV in a
commercially available rack.
When this unit is installed above your TV
When this unit is installed under your IV
Make sure that the rack is large enough tu alluw adequate
venlilation space arotmd this unit (see page 11) and thai it is
glrUllg
enuugh Io suppurt the weight of bolh Ihis Ullit alld your TV.
12