Operation'and'a'd'3Ustment - Pro-Form 595LE User Manual

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your traadmill features a walking belt coated with
PERFORMANT LUBE
TM,
a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking bolt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
This product Is for use on a nornina1120-volt circuit,
and has a grounding plug that looks like the plug Illus-
trated In drawing I below. A temporary adapter that
looks like the adapter Illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 If a properly
grounded outlet is not available.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the fight).
1
2
=_-_Grounded Outlet Box
_. 1 _SurgeSupp ressor
F_ i;l_ -. Grounding Pin
Grounded Outlet Box
__i er .Surge Suppressor
"Metal Screw _
Surge suppressors are sold at most hardware stores
and department stores. Use only a single-outlet surge
suppressor that Is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electdcally rated for
120 volts AC and 15 amps.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electdc current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be Installed
by a qualified electdcian.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
7