Table of Contents
Advertisement
Facility names and functions E
E6
INCOM PGM 1/2 level
Controls the receiving sound volume of the
program.
E7
INCOM 1/2 intercom level
Controls the receiving sound volume of the
intercom.
E8
INCOM 1/2 TALK ON/OFF switch
Intercom microphone can be switched on/off.
Upper: REAR MIC mode
Intercom
microphone
Intercom receive level can be adjusted
with E7.
Middle: OFF mode
Intercom
microphone
switched off. Intercom receive level can be
adjusted with E7.
Lower: FRONT MIC mode
Intercom microphone works while C5. is
pressed. Intercom receive level can be
adjusted with C6.
E9
This switch is used to select the PD or ENG
input of the external intercom system to be
connected to the CCU rear side.
E10 INTERCOM 1 / INTERCOM 2 connector
(XLR 5 pin)
Intercom headset can be connected.
E11 SCRIPT connector
Power for script lamp. 12V/maximum 1.0A can be
always
works.
supplied.
E12 RET CONT connector
This connector can be used for controlling
intercom TALK ON/OFF. Also RET1 and
is
completely
RET2 can be switched on/off.
10
E6
E7
E8
0
E9
0
E10
INCOM 1/2 PD/ENG select switch
E6
E7
E9
0
E8
0
E12
E11
1
Advertisement
Table of Contents
