Lens Installation - Hitachi Z-HD5000 Operating Instructions Manual

Hd color camera

Hide thumbs Also See for Z-HD5000:

Table of Contents

Lens installation

Install according to the following procedure.

1. Raise the lens lever and remove the mount

cap.

2. Align the lens center mark with the indent at

the upper part of the lens mount and install

the lens.

Notes

The following adjustments may be required according to the type of lens.

1. Lens flange back

2. Lens white shading

3. Lens auto iris speed

4. Lens iris close limit (AUTO IRIS menu)

Refer to the lens instructions when using the lens.

1. RET switch: RET1 ON/OFF selected by RET1 SEL in the camera adapter. (Refer to page 9)

2. VTR switch: Work for TALK or RET-2 function with CUSTOM SW MENU setting.

TALK: INCOM TALK ON/OFF,

RET2: RET2 ON/OFF selected by RET2 SEL in the camera adapter. (Refer to page 9)

3. EXTENDER: Extender LED in VF is lit and "E" is displayed on VF when EXTENDER is on.

3. Lower the lens lever to secure the lens.

4. Engage the cable with the cable clamp and

connect it to the lens connector.

Table of Contents