RCA CC6254 User Manual page 82

:7 _ _ .... i :_ !_
Tapes
A power supply must be attached to load or vject a tape.
When loading a tape, it takes a f_:w seconds for the cassette tape holder ()pen. Never
apply force to the holder or door cover as this might result in damage to the
camcorder and w)id the warranty.
if the cassette tape holder does not open af;_er a few seconds, close the holder door
and try again, if it still does not open, turn the camcorder off then on again.
if the tape does not load properly, open the cassette tape holder door and fkflly
remove the unit. Wait a fi,w minutes and reinserl it.
When the camcorder is suddenly moved fiom a cold environment to a warm
environment, wait a short time befk)re opening the cassette tape holder door.
Closing the cassette tape holder door befk)re the holder comes out may damage the
camcorder.
Even when the camcorder is turned off, a tape can still be loaded or unloaded. After
the cassette tape holder is closed with the camcorder switched off, though, it may
not recede, aMrn the power on before loading or unloading tapes.
When recording, once the cassette tape holder door is open, a blank pol_ion will be
recorded on the tape or a previously recorded scene will be taped over regardless of
whether the tape holder crone out or not.
80