Table of Contents
Advertisement
Manual
Focus
Make the necessary viewfinder adjustments to use
the viewfinder
(seepage
26).
1.
Set the Power switch to [] (manual
record).
([lm POWER indicator
comes on.)
MENU
dial
2.
3.
Press the MENU dial in. (The ('AMERA MENU
appears.)
Rotate the MENU dial to highlight
FOCUS Press
in the MENU dial to select it. (['he FOCU9 menu
appears.)
I
Power switch
4.
Rotate the MENU dial to highlight MANU Press
in the MENU dial to select it. (['he menu
disappears
and _t-._ appears.)
The focus is
locked at this point.
5.
POWER
indicator
,,
When f_nished, press in the MENU dial again to
exit. (_A
reappears
to indicate the focus is
locked.)
To fbcus on a subject that's fbrther away, rotate
the MENU dial upward.
• appears
and blinks.
'[k) {bcus
on a nearer
subject,
rotate
the MENU
dial downward.
• appears
and blinks.
Notes:
ff the lens is smeared or blurred,
accurate focusing
isn't possible.
Keep the
lens clean, wiping it with a piece of soft
cloth if it gets dirty. If condensation
occurs, wipe the lens with a soft cloth or
wait for it to dry naturally.
When shooting
a subject close to the
lens, zoom out first (see page 39). When
zooming
in the auto focus mode, the
camcorder
could automatically
zoom out
depending
on the distance between
the
camcorder
and the subject.
To return
to Auto Focus, highlight
AUTO
in step 4.
To readjust
Manual
Focus, repeat the
procedure
from step 2.
When the focus level cannot be adjusted
any farther
or closer, IA og J- blinks.
66
Advertisement
Table of Contents
