Table of Contents
Advertisement
MENU
dial
i
Power switch
POWER
indicator
II
b==_!
II
Date/Time
Insert
You can display the date and time in the camcorder
or on a connected
TV, as well as to record them
manually or automatically.
You should have already perfbrmed
the Date/Time
Setting procedure
(see page 22).
1.
Set the Power switch to [] (manual
record).
(The POWER indicator
comes on.)
2.
Press in the MENU dial. (The CAMERAMENU
appears.)
3.
Rotate the MENU dial to highlight I)ATFJflME
I)ISI3 Press in the MENU dial to select it. (The
I)AJTVffTIMEI)ISI)_ menu appears.)
4.
Rotate the MENU dial to highlight the desired
mode. Press in the MENU dial to select it. (['he
desired mode is activated.)
Notes:
DISPLAY
The selected display can be recorded.
If you do not want to record the display,
select the OFF mode before shooting.
AUTO DATE
In this mode,
the date is replaced after 5
seconds with AUTO DATE but isn't
recorded.
Your camcorder
automatically
records
the date for about 5 seconds after you
do the following:
Change the date.
Load a tape.
Select Auto
Date Record mode
by rotating
the MENU diaL
69
Advertisement
Table of Contents
