Setting The Tape Length - RCA CC6254 User Manual

Connections Setup
Setting the Tape Length
You need to select the tape length so that the camera
can alert you how much time you have left on the
tape.
i. Set the Power switch to [] (manual record). (The
POWER indicator comes on.)
MENU dial 2.
3.
Power switch
4.
POWER indicator
5.
6.
Press the MENU dial in. (The CAMERA MlzkVU
appears.)
Rotate fl_e MENU dial to highlight 7D SYST/Fv!
MIz_NUPress in the MENU dial to select it. ([l_e
S YST_M MIz_VUappears.)
Rotate file MENU dial to highlight 7NPE
I_VGlll. Press in the MENU dial to select it.
(The 7NIOELENGlll menu appears.)
Rotate fl_e MENU dial to highlight the length of
the tape you are using ('1'20, T30, T35, T40).
(['20=20 minutes, T30=30 minutes, etc. in SP
mode.) Press in the MENU dial to select it.
When f_nished, press in the MENU dial again to
exit.
Note: The tape remaining time feature is
accurate only if the correct tape length has
been selected.
24 Chapter "1