Maintenance - BorMann PRO BBC5010 Manual

EN
I: Input status
• The input energy is displayed in watts.
J: DC output status
• The display will show the output watts of the DC ports (2), (3).
K: AC output status
• The display will show the output watts of the AC port (6).
Other information
• The output watts of the USB port will not be displayed on the LCD screen (1).
• The LCD screen (1) will enter sleep mode after 120 seconds of inactivity (no new output load detected), and will "wake up" when inputting a charging cord
or when any button is pressed.
OPERATING INSTRUCTIONS
Attention:
• Do not connect a device via AC output port while charging the unit.
• Make sure to fully charge the unit before using it.
Charging the unit
• Connect the provided AC wall power adapter to the input (8), and allow the unit to fully charge prior to use (approx. 5-7 hours).
• When charging, the LCD screen (1) will be illuminated, and the battery level will be displayed by the battery level indicator (H).
• The unit is fully charged when the battery level is 100%. It is recommended to fully charge the unit every 3 months to maintain the health of the battery.
Powering / charging devices with the unit
• Select the type of outlet required by pressing the output ON/OFF button C/D/E.
• The output port will not function until the appropriate button is pressed to activate the port. When activated, the indicator on the button will illuminate
green, indicating that the output(s) are active, and the LCD display will turn on and provide details on the charging output.
• The LCD screen will automatically shut down when no outputs are activated.
Pass-through charging
• The unit is capable of charging a connected device via DC output & USB output while it is being charged.
Overloading
• If an output port is overloaded, the unit will:
- Automatically turn off AC Output (6) power.
- The blue indicator light of the LCD screen (1) will remain illuminated.
- The status of the DC output (J) will remain unchanged.

MAINTENANCE

• Recharge as needed.
• Avoid completely discharging the unit on a regular basis, as this can impact the overall life of the product.
• Regularly inspect all ports and the wall charger for any debris, dirt, damage and corrosion.
• Do not attempt to repair the unit by yourself if it is damaged in any way.
• Do not cover the unit with towels, clothing or other items.
• Keep the side vents clean and unobstructed at all times.
CLEANING
• Make sure that the unit is disconnected from all input power sources and output devices.
• Use a clean, dry, soft, lint-free cloth to wipe the unit clean.
• Remove any debris, dirt, or other blockages on both side vents. When cleaning debris from the side vents, do not allow the debris, dirt, or other blockages
to enter the body of the unit.
• Do not use abrasive cleaners or solvents.
• Do not use compressed air to clean the side cooling vents, as this will force foreign particles into the internal circuitry.
Warning: To avoid the risk of electrical shock, do not use metal objects to clean the ports.
STORAGE
• If storing for more than 1 month, charge the unit completely before storage and recharge approximately every 3 months to avoid full discharge and possible
damage.
• Store indoors, in cool temperatures, mild humidity, and away from direct sunlight.
• Exposing the unit to high temperatures can lead to decreased service life, overheating, and fire.
• Exposing the unit to extreme cold conditions can also harm the unit's performance and service life.
6
WWW.NIKOLAOUTOOLS.GR