Safety Instructions - BorMann PRO BBC5010 Manual

EN

SAFETY INSTRUCTIONS

Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in damage to the unit, physical
injury and/or damage to property. Store the manual in a safe place for future reference.
• Do not use any inappropriate power cords.
• Do not place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
• Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
• Do not drop the unit into water. If the battery in the unit comes into contact with water, it may cause chemical decomposition of the battery. This may cause
the battery to catch fire or explode.
• Never use or charge swollen, leaky, or damaged batteries.
• Never install or remove a battery from the unit when it is turned on.
• Do not use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious
accident.
• Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
• If the product hits a hard surface with force, stop using it. Use the product again only after checking it and making sure it is not damaged.
• If the product falls into water during use, take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is
completely dry. Never use it again and dispose it in accordance with local regulations.
• Do not allow pins, wires or other metal pieces to get inside the device case, outlets or controls. Metal pieces may short circuit the product.
• Make sure that the unit will not collide with hard objects. Do not place heavy objects on the machine.
• Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
• If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or inability to charge.
• Do not put the machine in a microwave oven or in a pressurized container.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
• To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the unit.
• Do not use a battery or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
• Do not operate the unit if a cord or plug is damaged, or if the output cable is damaged.
• Do not disassemble the unit. Incorrect reassembly may result in a risk of fire or electric shock.
• To reduce the risk of electric shock, unplug the unit from the outlet before performing any maintenance work.
Warning - Risk of explosive gases
• Working in vicinity of a lead acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of the utmost
importance that you follow the instructions each time you use the unit.
• To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and by the manufacturer of any equipment
you intend to use in the vicinity of the battery.
• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with plenty of water. If liquid contacts
eyes, flush with plenty of water and seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
• Do not expose the unit to fire or excessive temperatures.
Recharging
• Do not charge the unit via power supply systems that operate outside of 100-240V.
• Do not charge the unit via solar panel with operating voltage outside of DC12-24V.
• Always use approved attachment charging cables. We take no responsibility for any damage caused by using another brand's charging cable.
• When charging, place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine
unattended during charging.
• Do not charge a product immediately after a long heavy load, because the product's temperature may be too high. Do not charge a product until it cools
down to room temperature.
• Only charge and use the unit within an ambient temperature of 0 to 40°C (32~104°F).
• The ideal charging temperature range is 22°C to 28°C (71°F to 82°F).
Storage and transportation
• Keep the product out of the reach of children. If any children accidentally swallow parts, go to a doctor immediately.
• If the low-battery warning appears, charge the battery before storing the unit.
• Store the product in dry environments. Do not place the product in a spot where it may contact with water.
• Make sure no small metal objects can fall on or around the product while in storage.
• Do not transport the product if its battery power level is higher than 30%.
2
WWW.NIKOLAOUTOOLS.GR