Button Functions - BorMann PRO BBC5010 Manual

EN
EXAMPLES OF DEVICES POWERED BY THE UNIT
• Laptops (41.4Wh): Around 5.9 recharges.
• 32'' TV (60W): Around 4 hours.
• CPAP without heated humidifier (15W): 16 hours.
• Gopro (5.9Wh): Around 41 recharges.
• Floodlight (4W): Around 61 hours.
• Mini fridge (40W): Around 6 hours.
• DJ drone (89.2Wh): Around 2.7 recharges.
• Smartphone (10Wh): Around 24 recharges.
• Nintendo switch (16W): Around 15 recharges.

BUTTON FUNCTIONS

Note: Refer to previous page, section ''Buttons''.
Button A: Unit ON/OFF
• Press button A to turn on the unit or to shut down the outputs when not in use.
Button B: SOS mode & LED light
• This function is available no matter if the unit is turned on or not.
• Press button B to turn on the LED light.
• Double click it to turn on the SOS mode.
• Press button B to go back to LED light mode, then press it again to turn off the light.
Button C: DC output ON/OFF
• Make sure the unit is turned on before pressing button C to turn on the DC output.
• Press button C to shut down the output(s) when not in use.
Button D: USB output ON/OFF
• Make sure the unit is turned on before pressing button D to turn on the USB output.
• Press button D to shut down the output(s) when not in use.
• If the USB-C port doesn't work, try using the AC adapter to charge.
Button E: AC output ON/OFF
• Make sure the unit is turned on before pressing button E to turn on the AC output.
• Press button E to shut down the output(s) when not in use.
Wireless charger
• Turn on the unit to turn on the wireless charger.
• Turn off the unit to shut down the output(s) when not in use.
Cooling fan
• The unit is equipped with an internal cooling fan to ensure that the product operates within the appropriate temperature range.
• When the unit experiences a higher output load, the fan will automatically be turned on during discharge or recharging.
• The fan may operate intermittently to keep the internal temperature within the appropriate operating range.
• The fan will likely start when the AC circuit is activated to ensure proper operation.
INFORMATION DISPLAYED ON LCD SCREEN
Note: Refer to section ''LCD screen''.
H: Battery level indicator
• The current battery level is indicated by the percentage shown and by the number of bars displayed.
- 0-5%: no bars.
- 6-20%: one bar.
- 21-40%: two bars.
- 41-60%: three bars.
- 61-80%: four bars.
- 81% and above: 5 bars.
Note: The value shown can change multiple times as the energy draw from the connected devices changes.
Attention: It is recommended to charge the unit when the battery level is less than 20%.
Note: When you first plug in a power source, whether it's a solar panel or a wall charger, the unit may take a minute to detect and adjust its charge circuitry
before it starts drawing power from the source.
5
WWW.NIKOLAOUTOOLS.GR