Maintenance and repair work not de-
scribed in this chapter must be carried out
by qualified specialists only.
Check all screwed connections for
tightness and tighten if necessary.
Clean the filter in the compressed air
connection at least once a week. It is
recommended that a pressure reducer
with water separator and oiler be con-
nected in front of the tool.
Do not store tool unprotected outdoors
or in humid environment.
6.
Repairs
A
Danger!
Repairs to air tools must only be carried
out by qualified specialists!
Air tools in need of repair can be send to
the service centre in your country. Refer to
spare parts list for address.
Please attach a description of the fault to
the air tool.
7.
Protection of the Environ-
ment
All packaging materials are recyclable.
End-of-life tools and accessories contain
large amounts of valuable raw materials
and plastics which must be recycled.
This manual was printed on chlorine-free
bleached paper.
8.
Scope of delivery
1 die grinder STS 630 set
1 collet, Ø 3 mm
1 collet, Ø 6 mm
2 assembly spanners
5 each grinding points Ø 3 mm and
Ø 6 mm
1 male coupling, R 1/4"
1 plastic case
1 Operating Instructions
9.
Accessories
Pneumatic oil, 0.5 l,
art. no.: 090 100 8540
Attachment oiler, R 3/8",
art no.: 090 105 4592
ENGLISH
13