Tume SUPER NOVA COMBI 3000 User Manual page 35

Feeding rate
commanded by the
task controller is
shown on yellow
background.
11.2.3.2 TC SC functionality
TC SC (Section Control) is taken to use from tractor's terminal. See tractor's user manual how to
do that.
In Super Nova Combi section control can control feeding start/stop to left and right half of the
machine. For example, in wedges the section control turns off/on half of the machine to reduce
double seeded area.
Select the amount of the channels from the
You can also change the geometry and on/off times. See previous chapter.
menu. 1 or 2.
35
Feeding rate
commanded by the
user is shown on
grey background.