Canon ZR850 Instruction Manual page 67

•.o,, C onnecting toaTV orVCR
4
Press _ to begin dubbing.
• _ Audio device: Begin
playback.
• Microphone: Speak into the
microphone.
5 Press _ to stop dubbing.
Audio device: Stop playback.
II
• Audio dubbing witl stop if the tape has a blank
section or a section recorded in LP mode or
[_ 16bit] audio
• You cannot use the DV terminal for audio
dubbing.
• The quaIity of the dubbed sound wiII not be as
good when dubbing audio to a tape that was not
recorded with this camcorder or after having
dubbed audio over the same scene more than 3
times
• While dubbing audio using the buiIt-in
microphone: You can connect the camcorder to
a TV to check the picture on the TV screen and
check the sound through headphones
connected to the TV
• _ While dubbing audio using an
externaI audio device: You can check the
picture on the camcorder's LCD screen and the
sound through the built-in speaker or the audio
device
TO SELECTTHE AUDIO TRACK FORPLAYBACK
You can select the audio track that will be
played when playing back a tape that was
audio dubbed (EZJ 51).