Table of Contents
Advertisement
24/01/2024 14:40
After connecting an audio system to the TV, adjust the TV's audio output from the audio
system.
Adjusting an audio system connected with an HDMI cable or
digital optical cable
1
After connecting the TV to your audio system, press the ACTION MENU
button, then select [Speakers] — [Audio system].
2
Turn on the connected audio system, then adjust the volume.
If you connect a BRAVIA Sync-compatible device with an HDMI connection, you
can operate it by simply using the TV's remote control.
Note
You need to configure the [Digital audio out] settings according to your audio system.
Press the HOME button, then select [Settings] — [Display & Sound] — [Audio
output] — [Digital audio out].
If the audio system is not compatible with Dolby Digital or DTS, set [Settings] —
[Display & Sound] — [Audio output] — [Digital audio out] to [PCM].
Hint
If a specific audio system is connected with an HDMI cable, you can adjust the
output timing of the picture and sound.
Adjusting the AV sync setting
For details about supported models, refer to the support site.
Support Site
Adjusting an audio system connected with an audio cable
1
After connecting the TV to your audio system, press the HOME button, then
select [Settings] — [Display & Sound] — [Audio output] — [Headphone/Audio
out] — [Audio out (Fixed)].
2
Turn on the connected audio system, then adjust the volume.
Note
https://helpguide.sony.net/tv/gaep1/v1/en/print.html
Guide d'aide
73/141
Advertisement
Table of Contents
