Table of Contents
Advertisement
24/01/2024 14:40
Point the remote control at the sensor on the front of the TV and press the power button
on the remote control.
Check if the TV turns on or if the illumination LED lights up.
If the illumination LED lights up but the TV does not turn on, try resetting (restarting) the
TV.
If a full reset (restart) of the TV is required
2. Check if the TV turns on with the power button on the TV.
Press the power button on the TV and check if the TV turns on. The power button is on the
side or back of the TV.
For details, refer to the Reference Guide of the TV.
If the TV turns on with this procedure, there may be a problem with the remote control.
Refer to the following topic.
The remote control does not operate.
3. Unplug the AC power cord (mains lead).
Unplug the TV power cord (mains lead) from the electrical outlet. Then press the power
button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into
the electrical outlet.
Hint
When you unplug the TV and plug it in again, the TV may not be able to turn on for a
while, even if you press the power button on the remote control or TV. This is
because it takes time to initialise the system. Wait for about 10 to 20 seconds, then
try again.
Related topics
The remote control does not operate.
If a full reset (restart) of the TV is required
[165] Troubleshooting
Connected devices
No picture from a connected device.
You cannot select a connected device in the Home Menu.
https://helpguide.sony.net/tv/gaep1/v1/en/print.html
Guide d'aide
129/141
Advertisement
Table of Contents
