Table of Contents
Advertisement
24/01/2024 14:40
Audio noise.
[148] Troubleshooting | Sound
You want to output sound from both the
headphones/Bluetooth audio device/audio system
and the TV speakers.
To output sound from both the headphones/Bluetooth audio
device and TV speakers
Sound can be output from both headphones or Bluetooth audio device and TV speakers
by performing the setting below. However, the setting method varies depending on
whether the TV is an A2DP-supported model.
A2DP-supported models that can use Bluetooth audio devices have [A/V sync] in
[Settings] — [Display & Sound] — [Audio output].
If the TV is not an A2DP-supported model
Press the HOME button, then select [Settings] — [Display & Sound] — [Audio output]
— [Headphone speaker link] — [Off] to output sound from both the device connected to
the headphone jack and the TV speakers.
Bluetooth audio devices such as Bluetooth headphones cannot be used.
If the TV is an A2DP-supported model
Press the HOME button, then select [Settings] — [Display & Sound] — [Audio output]
— [Audio to both TV speakers & other device] to enable it and output sound from both
the device connected to the headphone jack or Bluetooth headphones, and the TV
speakers.
To output sound from both an audio system connected via
ARC and TV speakers
Sound can be output from both an audio system connected to the TV and the TV speakers
at the same time by satisfying the following conditions.
Connecting the TV and audio system using a digital optical cable
Setting [Digital audio out] to [PCM]
https://helpguide.sony.net/tv/gaep1/v1/en/print.html
Guide d'aide
119/141
Advertisement
Table of Contents
