Makita VC011G Instruction Manual page 12

The length of the wand can be adjusted.
With pressing the slide button, adjust the wand length.
The length is locked when releasing the slide button.
Fig.20
► 1 . Slide button
For the ring-type extension wand
Shoulder the vacuum cleaner body then twist and insert
the extension wand into the bent pipe assembly. To
disconnect, twist and extract it.
1
Fig.21
► 1 . Bent pipe assembly 2. Ring-type extension wand
3. Flexible rubber nozzle
NOTE: The flexible rubber nozzle can be attached to
the bent pipe assembly without pipe lock directly.
The length of the wand can be adjusted.
Loosen the ring on the wand and adjust the wand
length. Tighten the ring at your desired length.
1
Fig.22
► 1 . Ring
For the aluminum bent pipe / aluminum straight
pipe
(Only for the model with ø38 mm hose and front cuff 38)
Shoulder the vacuum cleaner body then twist and insert
the pipe into the front cuff. To disconnect, twist and
extract it.
3
2
3
Fig.23
► 1 . Front cuff 38 2. Aluminum bent pipe 3. Aluminum
straight pipe 4. Nozzle
12 ENGLISH
1
1
2
3
4