Download Print this page

Feit Electric SL50-36/RGB/AG Instructions

Smart permanent led string lights

Advertisement

Quick Links

INSTALLING PERMANENT STRING LIGHTS
Power Supply
LED Controller
4.6ft / 1.4m
3.28ft /1m
Connect to
Power Outlet
Extra Cord
8.2ft / 2.5m
Includes an extra 8.2ft/2.5m female/male
connector cord for increasing cable length
mounting
screws
16.6in / 42cm
NOTE: THESE PERMANENT STRING LIGHTS
NOTE: DO NOT OVERTIGHTEN THE SCREW.
INCLUDE PERMANENT MOUNTING TAPE
AND MAY CAUSE SURFACE DAMAGE IF
REMOVED. NOT RECOMMENDED FOR
NOTE: IT IS RECOMMENDED TO
MOUNTING ON BRICK OR CONCRETE. FEIT
MOUNT USING BOTH MOUNTING
ELECTRIC IS NOT RESPONSIBLE FOR
TAPE AND MOUNTING SCREWS.
DAMAGE TO MOUNTED SURFACES.
CONNECTING MULTIPLE SETS
MAXIMUM
STRING LIGHT
WATTAGE
LENGTH IN BOX
36 WATTS
50 FT
TROUBLESHOOTING TIPS - MOUNTING
1. Replug in the power supply and press the power button to confirm it is turned on.
2. Ensure all connections are properly secured.
4 of 4
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
female
cap
String Light
Additional String Light
16.6ft / 5m
NOTE: WHEN NOT IN USE,
ENSURE THE FEMALE END CAP
IS COMPLETELY SCREWED IN.
Use with the mounting tape or mounting screws
NUMBER OF LIGHT
1 LIGHT SECTION
MAX LENGHT
SECTIONS IN BOX
3
9W/16.6FT
DO NOT EXCEED
4 SECTIONS / 66.6FT
EXTENSION
SOLD SEPARATELY
MODEL SL50-36/RGB/AG
SMART PERMANENT LED STRING LIGHTS
READ ALL INSTRUCTIONS
16.6ft / 5m
WARNING: When using outdoor use portable luminaires, basic safety precautions should always be followed to
reduce the risk of re, electric shock, and personal injury, including the following:
a. Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be
used for the wet location portable luminaire. Receptacles are available having built-in GFCI
protection and are able to be used for this measure of safety.
b. Do not mount or place near gas or electric heaters, replace, candles, or other similar sources of heat.
c. Do not secure the wiring of the product with staples, nails, or place on sharp hooks.
d. Install only using the mounting means provided.
e. Do not let lights rest on the supply cord or on any wire.
f.
Do not use this product for other than its intended use.
g. Do not hang ornaments or other objects from the cord, wire, or lights.
h. Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
i.
When in use, do not cover the product with cloth, paper, or any material that is not part of
the product.
j.
Keep lights away from any combustible surface.
k. Read and follow all instructions that are on the product or provided with the product.
l.
This product should be installed out of the reach of children.
m. Do not secure string lights to buildings or other structural supports using nails, staples or other sharp,
conducting materials. DO NOT DAMAGE THE WIRE.
n. Do not submerse.
o. Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding
The mounting tape is
receptacles that accept the appliance's plug.
on the back of the LEDs.
p. Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW,
SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW,
or SJTOOW.
SAVE THESE INSTRUCTIONS
DRAWINGS NOT TO SCALE.
CAUTION:
1.
To avoid risk of shock, always make sure the product is unplugged from the electrical outlet before
assembling, disassembling, installing, relocating, servicing or cleaning it.
2.
Do not overload. This product contains 50FT of string lights, made of three 16.6-foot sections. Each
section uses up to 9W. One additional extension of 16.6FT (sold separately) can be added to reach a total
of 66.6 feet and use up to 36W.
3.
Do not use with extension cord near water or where water may accumulate. Keep at least 4.8 m / 16 ft
from pools and spas. Keep plugs and receptacles dry. Do not submerse.
4.
Do not exceed the lowest of the indicated maximum wattage on the cord tag near the connected
product's receptacle.
5.
TO REDUCE THE RISK OF FIRE: Do not replace the attachment plug. It contains a safety device (fuse) that
should not be removed. Discard product if the attachment plug is damaged.
1 of 4
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
Only supports
2.4GHz Wi-Fi
networks
Works with
Feit Electric app
Product Specifications:
• 120VAC 36W 50/60Hz
• Dimmable with app
• Suitable for Wet Locations
• IP65 Water Resistant

Advertisement

loading

Summary of Contents for Feit Electric SL50-36/RGB/AG

  • Page 1 2. Ensure all connections are properly secured. 4 of 4 1 of 4 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com...
  • Page 2 The performance specifications (life hours) printed on this manual should only be considered an approximation of expected performance. 2 of 4 3 of 4 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com...