Feit Electric TORCH2/LED/3 Manual

MODEL: TORCH2/LED/3
SOLAR LED MINI ISLAND TORCH
IP65 WET RATED FOR OUTDOOR USE
CHARGING TIME: 6 8 HOURS
WORKING TIME: UP TO 8 HOURS ON A FULL CHARGE
CAUTION: DO NOT OVER TIGHTEN THREADED RODS!
Do Not hold the torch head when tightening. Hold the rods
and lock them in place slowly.
CHOOSE THE BEST LOCATION FOR YOUR TORCH
Select a location with full and direct sunlight. If installed in a shady area, the battery
will not fully charge and will reduce the night-time working hours.
Operating time should be up to 8 hours with full charge.
For optimal performance at night, the solar panel should receive a minimum of 8
hours of sunlight per day.
Do not install near night-time light sources such as porch lights or street lights. These
light sources may cause the solar panel to turn the product off.
Solar torches work independently of each other because
they are not wired. Torches should not be placed closer than
5 feet from one another.
ASSEMBLY AND INSTALLATION
Carefully remove the fixture and hardware from package
1
and make sure that no parts are missing by referencing
the contents on right.
2
Please remove the Battery tag from inside the fixture before use.
3
Each fixture has an ON/OFF button. Before installing torch, press ON/OFF
button to the ON position. Device will automatically turn on at night
and turn off at dawn.
4
Assemble all post sections together using couplers to achieve desired
height and attach plastic ground stake (if required) to the bottom of
assembled post.
5
Secure torch head onto assembled mounting post after using male and
female couplers to achieve desired height.
6 Select a location with full direct sunlight and push the ground stake
into the ground. Insert ground stake deep enough into the ground to
ensure fully assembled torch is stable and does not tip over.
Do not push on the torch head or you may damage the device.
NOTE: When installing product in hard or dry soil, water the soil
several hours beforehand to make the installation easier. You can
also break up the ground lightly with a stake or a fork. Don't force
stake into the ground as excess force can break or bend the stake.
REV007
WARNING: KEEP DEVICE AWAY FROM FIRE OR BEING FULLY IMMERSED IN WATER.
(Figure 1)
FEIT ELECTRIC COMPANY | PICO RIVERA, CA, U.S.A. www.feit.com
(Figure 1)
(Figure 2)
(Figure 2)
battery tag
PARTS INCLUDED
Torch Head with
3
Lithium-ion 800mAh battery
3
Mounting Posts
3
Ground Stakes
3
Battery Couplers
3 Female Adapters
Solar Panel
Torch Head:
Solar Panel LED bulb
ON/OFF Button
Battery
Battery Tag
Battery Coupler
Mounting pipe
Female adapter for
Landscape installation
Stake