Advertisement
Getting Started:
Download the Feit Electric app on your
smart device
Feit Electric app
Install your Smart Permanent String Lights
See "Installing Permanent String Lights" section on
page 4.
Plug in your Smart Permanent String Lights
Plug the Smart Permanent String Lights into an outdoor
rated GFCI receptacle.
WARNING: These products may represent a possible
shock or fire hazard if improperly installed or attached in
any way. Products should be installed in accordance
with the owners manual, current electrical codes and/or
the current National Electric Code (NEC).
To activate smart features proceed to steps 4 & 5.
NOTE: WHEN USING OUTDOORS,
PLUG THE UNIT INTO AN
APPROPRIATELY RATED GFCI
RECEPTACLE WITH COVER.
Need Help?
Thank you for your purchase
Questions, comments or feedback?
We'd love to hear from you.
feit.com/help
Visit
for support or connect with us:
@FeitElectric
@FeitElectricInc
feitelectriclighting
2 of 4
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
Pair your device
Press and hold for 5 seconds when lights are On to enter
pairing mode. Lights will blink.
Launch and use the Feit Electric app to
complete the setup
Tap Add Device or the + sign, then select Chasing Lights
and confirm. You will be prompted to enter your Wi-Fi
network and password.
Be sure to connect to a
2.4 GHz Wi-Fi network
that covers your
installation location.
(Optional) Connect to Google Assistant or Alexa using
the in App guide
Chasing Lights
Color
Tap Pen icon
Choose Alexa or Google
Power Supply and LED Controller
8 MODES:
1. Party
2. Red
3. Green
4. Blue
5. White
6. Fade
7. Chasing
8. Flow
Press power button once to turn on and twice to turn o .
Press and release to cycle through 8 di erent colors, themes or modes.
Press and hold for 5 seconds or until bulbs start to blink to enter pairing mode or to reset.
TROUBLESHOOTING TIPS - WI-FI
If you are having difficulty connecting:
• Make sure the Wi-Fi network is a 2.4 GHz network. Smart Permanent String Lights will not connect to a 5 GHz network.
• Test your Wi-Fi network with other devices such as your phone to make sure it is operating properly.
• The Wi-Fi connection may not have good coverage during set up. Try moving the Smart Permanent String Lights closer to your Wi-Fi router.
• Your Wi-Fi network password is case sensitive, make sure you are entering correctly. Devices plugged into your Smart Wi-Fi Plug must be ON in order to
be controlled via the mobile app.
Please also check the App User Guide for more information.
LIMITED WARRANTY
This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase.
feit.com/help for help. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow
the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
Supplier's Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company, 4901 Gregg Road,
Pico Rivera, CA 90660, USA 562-463-2852
Unique Identifier: SL50-36/RGB/AG
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for
help. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
The performance specifications (life hours) printed on this manual should only be considered an approximation of expected performance.
3 of 4
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
If the product fails within the warranty period, please visit
feit.com/help
Advertisement
