Software/Firmware Upgrade Process - BenQ W700 Product Service Manual

Software/Firmware Upgrade Process

Projector USB Drivers Installation Guide
The document is to describe the Windows application software "Flash-Tool" for projector firmware.
Its main purpose is to provide a detailed procedure of upgrading the application software of a DLP
The system requirement and the installation procedure of "Flash-Tool" are also included in the document.
Note:
The user must have administrative privileges on the target computer in order to
install your driver.
The installation target directory must not write protected.
User also required having the basic knowledge of Windows application installation.
Attention: This utility is for DLP
System Requirement
1. IBM compatible PC.
2. Windows XP-SP2 operating system.
Install Flash-Tool to PC
Run the "Digital Zoom Projector Flash Tool
drivers update. Following are the dialogues of the Driver Install process as below.
TM
DDP2000/3020/2230/243X series projector only.
Vx.y.msi", it will automatically launch the USB
(Step 1) This is the first page of install dialog.
Click on the "Next" button to continue, or Click on the
"Cancel" button to cancel the installation.
(Step 2) Driver Destination:
Click on the "Change" button to change the default
directory for saving the driver file somewhere else, or
Click on the "Back" button to return to the previous
page, or Click on the "Cancel" button to cancel the
installation
34
TM
projector.