Aligning The Appliance; Installation Location - Miele FNS 4782 E edt/cs Operating Instructions Manual

Aligning the appliance


Risk of damage and danger of
injury due to the appliance door
swinging open or the refrigeration
appliance tipping over.
If the additional adjustable foot on
the hinge plate at the bottom is not
resting firmly on the floor, the
appliance door may swing open or
the refrigeration appliance can tip
over.
Use the open spanner supplied with
the appliance to unscrew the
adjustable foot until it is resting on
the floor.
Then unscrew it by a further quarter
turn.
 Use a spirit level and the open
spanner supplied to align the
refrigeration appliance and support
the appliance door.
1. Adjust the front adjustable feet.
2. Unscrew the additional adjustable
foot until it is touching the floor. Then
unscrew it by a further quarter turn.

Installation location


Risk of damage due to high
humidity.
In environments with high humidity,
condensation can build up on
external refrigeration appliance
panels.
This condensate can cause corrosion
on external appliance panels.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation, please make sure
that the appliance door(s) closes/
close properly and that the specified
ventilation gaps are adhered to.

Fire hazard and risk of damage
from appliances that give off heat.
Appliances that give off heat can
catch fire and set fire to the
refrigeration appliance.
Do not place appliances which give
off heat, such as mini-ovens, double
burner cooktops or toasters on the
refrigeration appliance.

Fire risk and danger of damage
from open flames!
Open flames can set fire to the
refrigeration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration
appliance.
Installation
19