Table of Contents
Advertisement
Ventilation requirements
Risk of fire and damage due to
insufficient ventilation!
If the appliance is not ventilated
sufficiently, the compressor will run
more frequently and for longer
periods. This will result in increased
energy consumption and a higher
operating temperature of the
compressor. This, in turn, can result
in damage to the compressor.
Please ensure that there is adequate
ventilation around the appliance.
It is essential to observe the required
ventilation gaps.
The ventilation gaps must not be
covered or blocked in any way.
They must also be cleaned on a
regular basis to remove dust.
Air at the back of the refrigeration
appliance gets warm. Sufficient space
for proper ventilation must therefore be
ensured (see "Installation dimensions").
Installing multiple refrigeration
appliances
Risk of damage due to
condensation on the external
appliance panels.
In environments with high humidity,
condensation can build up between
the external refrigeration appliance
panels, which can cause corrosion.
Do not place different refrigeration
appliances directly next to one
another.
A distance of at least 70 mm must be
maintained between the refrigeration
appliances.
Side-by-side installation
Your freezer can be installed to the left
of another refrigerator as it is equipped
with an integrated heater in the right-
hand side panel (see "Appliance
dimensions").
The refrigerator must also be equipped
with an integrated heater in the left-
hand side panel.
Depending on the model, the side-by-
side installation kit will be provided with
the freezer. The accompanying
installation instructions describe how to
install the refrigeration appliances next
to each other.
Useful tip: Please contact Miele for
information on which combinations are
suitable for your appliance.
Installation
21
Advertisement
Table of Contents
