Loudspeaker (Center: Tweeter/Woofer) - Sony HT-ST5000 Service Manual

2-40. LOUDSPEAKER (CENTER: TWEETER/WOOFER)

3 loudspeaker
(tweeter (center))
block
2 Lift up the loudspeaker
(tweeter (center)) block
in the direction of the arrow.
left side
bottom side
1 screw
(BVTP3.5)
1 screw
(BVTP3.5)
Note 1: When connecting the terminals of the speaker
connection cable to the loudspeaker, check the
direction of the terminals before installing.
front side
terminal (wide)
[purple]
OK NG
speaker connection cable
Note 2: Solder so that wire is covered.
OK
Covered with
solder.
1 two screws
(BVTP3.5)
loudspeaker
terminal
(woofer (center))
(narrow)
[black]
OK NG
two bosses
NG
Not covered
with solder.
1 two screws
(BVTP3.5)
–
front side
loudspeaker
(tweeter)
1 screw
(BVTP3.5)
1 screw
(BVTP3.5)
Wire is straight.
8 loudspeaker (tweeter (center))
hole
hole
5 terminal
(narrow)
[black]
5 terminal
7 Remove
the solder.
[white]
boss
HT-ST5000
–
OK NG
loudspeaker
(tweeter)
Wire is bent.
top side
center speaker block
right side
Note 4: When installing the loudspeaker
(tweeter (center)), align the two
bosses and two holes.
hole
6 loudspeaker
(woofer (center))
Note 3: When installing the
loudspeaker
(woofer (center)),
hole
align the two bosses
and two holes.
(wide)
[purple]
4 Lift up the loudspeaker
(woofer (center)) block
in the direction of the arrow.
boss
7 Remove the solder.
[black]
47