Sony HT-ST5000 Service Manual page 56

HT-ST5000
DEMO MODE 2 (Single/Multi display)
The demo mode 2 (Single/Multi display) can be performed.
Procedure:
1. Press the [ ] button to turn the power on.
1
2. Press the buttons on the remote commander in the order of [
→ [DISPLAY] → [INPUT +] → [V].
3. The message "Vol 40" ("40" is default value) → "HDMI 1" is
displayed on the front panel display, and enter the demo mode,
then changed to the initial setting for demo mode 2.
Vol 40
HDMI 1
(Displayed values in the above fi gure are example)
Initial setting for demo mode 2:
• Output HDMI 1 image at all times.
• Cannot power off by the [
1
remote control).
• The auto standby function becomes invalid.
Releasing method:
Perform the "DEMO RESET" on this page.
DEMO MODE 4 (Height Speaker)
The demo mode 4 (Height Speaker) can be performed.
Procedure:
1. Press the [ ] button to turn the power on.
1
2. Press the buttons on the remote commander in the order of [
→ [DISPLAY] → [INPUT –] → [v].
3. The message "DEMO4" → "Muting" is displayed on the front
panel display, and enter the demo mode, then changed to the
initial setting for demo mode 4.
DEMO4
Muting
Initial setting for demo mode 4:
• Cannot power off by the [
1
remote control).
• The auto standby function becomes invalid.
• When the non-operation for fi ve minutes is followed, setting
will return to the state when entering demo mode 4.
• When insert the AC power cord into the wall outlet, it auto-
matically turns on and enters the demo mode 4.
Releasing method:
Perform the "DEMO RESET" on this page.
56
] button (both the main unit and the
Blinks
] button (both the main unit and the
DEMO CUSTOM PRESET
It can preset the demo mode parameters.
Procedure:
1. In the each demo mode state, press the two buttons of the [
] and [+] simultaneously for fi ve seconds.
x
2. The message "PRSET" is displayed on the front panel display
and the parameters of the demo mode are preset with the cur-
rent set value.
Items that can be changed settings:
Volume (See Note 1)
Function
Sound fi eld
Subwoofer volume
(See Note 2)
Note 1: Since the minimum set value of the volume is 10, it becomes 10
even if it is set to 10 or less.
Note 2: Since the minimum set value of the subwoofer volume is 5, it
becomes 5 even if it is set to 5 or less.
3. When the "DEMO MODE INITIALIZE" below is performed,
the value set in this mode is applied as the initial value.
Note 3: When release the each demo mode, the set of preset values are
deleted.
DEMO MODE INITIALIZE
It can returns to the initial value setting of the each demo mode.
]
x
Procedure:
1. In the each demo mode state, press the buttons on the remote
commander in the order of [BACK] → [ ] → [B] → [B] →
[B] → [B].
2. The returns to the initial value setting of the demo mode. When
preset is set with "DEMO CUSTOM PRESET" above, it be-
comes that setting value.
DEMO RESET
It can release the each demo mode.
Procedure:
1. In the each demo mode state, press the two buttons of the [
and [ ] simultaneously for fi ve seconds.
1
2. The message "WAIT" blinks for a few seconds → "RESET"
→ "HELLO" is displayed on the front panel display to release
the each demo mode and then turn the power off.
Display is turned off
PRSET
Demo Demo
mode 1 mode 2
○ ○
○ ×
○ ×
○ ○
WAIT
Blinks
RESET
HELLO
]
Demo
mode 4
○
○
×
○
]