Sony HT-ST5000 Service Manual page 57

BUILT-IN DEMO
It can playback of built-in demo sound source or USB memory.
Procedure for built-in demo sound:
1. Press the [ ] button to turn the power on.
1
2. Press the [ ] button for three seconds.
3. The message "DEMO" is displayed on the front panel display
and then built-in demo sound is playback.
DEMO
Releasing method for built-in demo sound:
Press the [ ] button and return to the normal mode, or the built-in
demo sound source playback is fi nished, the demo mode will be
released automatically.
Procedure for USB memory:
1. Connect the USB memory with the music data to the main
unit.
2. Press the [ ] button to turn the power on.
1
3. Press the [ ] button for three seconds.
4. The USB function is selected, and the music data in the USB
memory is playback automatically.
Note: Because it is a normal USB function, there is no operation for re-
lease of this mode.
HOTEL MODE
The hotel mode can be performed.
Procedure:
1. Press the [ ] button to turn the power on.
1
2. Press the buttons on the remote control in the order of [BACK]
→ [ ] → [DIMMER] → [%] → [DIMMER] → [%].
3. The message "HOTEL" is displayed on the screen display
panel.
HOTEL
4. Press the [ ] button on the remote control, the message "OFF"
or "ON" (default "OFF") is displayed on the front panel dis-
play.
OFF
(Displayed characters in the above fi gure are example)
5. Select the "ON" to press the [V]/[v] buttons on the remote
control.
6. Press the [ ] button on the remote control, return to the "HO-
TEL" display.
7. Press the [v] button on the remote control, the message
"VOL." is displayed on the front panel display.
Note: If hotel mode is "OFF", "VOL." cannot be selected (not displayed).
VOL.
8. Press the [ ] button on the remote control, the message "Max
50" ("50" is default value) is displayed on the front panel dis-
play.
Max 50
(Displayed values in the above fi gure are example)
9. Select the maximum volume setting (1 to 50) to press the [V]/
[v] buttons on the remote control, and press the [ ] button on
the remote control.
Blinks
Blinks
Blinks
Blinks
10. Press the [BACK] button on the remote control, maximum vol-
ume setting of the hotel mode is complete, and return to the
normal display.
Initial setting for hotel mode:
• When the power is turned on, volume is changed to 0.
• Maximum volume will be changed to the settings value (de-
fault "50") for step 9.
Releasing method:
Perform the "ALL RESET" on page 55, or the step 5 of this mode
settings to select the "OFF" and press the [ ] button on the remote
control, then press the [BACK] button on the remote control.
Note: The hotel mode does not release by unplug the AC cord.
PANEL TEST
It can check the lighting state of OLED display (front panel dis-
play) and LED, operation of buttons, display of model name, des-
tination and software version.
Procedure:
1. Press the [ ] button to turn the power on.
1
2. Press the buttons on the remote commander in the order of [
→ [DISPLAY] → [v] → [V].
3. BLUETOOTH indicator LED is lighted up, and repeatedly
changes display of front panel display in order from high-
brightness → low-brightness → lights off.
BLUETOOTH Front panel
indicator display
– Front view –
4. In the state of step 3, press the [
played on the front panel display.
K 0
Each time a button on the unit is pressed, "K 0" value increas-
es.
Note: Buttons once pressed are not counted.
When pressing the all buttons, "OK" and "K 6" are alternately
displayed on the front panel display.
OK
K 6
5. Press the [ –] button on the remote commander and return to
2
the state of step 3.
HT-ST5000
]
x
High-brightness
Low-brightness
Lights off
] button and "K 0" is dis-
– Continued on next page –
57