STIEBEL ELTRON WPL 33 Installation Instructions Manual

WPL 33
Compact air/water heat pump
Installation instructions
The installation (water and electrical work) and commissioning, as well as the maintenance of this
equipment, must only be carried out by an authorised qualified contractor in accordance with these
instructions.
Index
1 General
1.1 Equipment description
1.2 Function
1.3 Correct operation
1.4 Incorrect operation
1.5 Regulations and standards
1.6 Standard delivery and accessories
2 Specification
2.1 Specification
2.2 Performance diagram
2.3 Performance diagram
3 Installation, connection, sound emissions and
commissioning
3.1 Transport
3.2 Installation location
3.3 Noise emissions
3.4 Installing the base unit
3.5 Base unit assembly
3.6 Heating water connection
3.7 Circulation pump
3.8 Condensate drain
3.9 Buffer cylinder
3.10 Second heat source
3.11 Checking the fan
3.12 Installing casing components
3.13 Routing air hoses
3.14 Fitting air hoses
3.15 Insulating wall outlet
4 Electrical connection
5 Commissioning
6 Operation and control
7 Maintenance and cleaning
7.1 Maintenance
7.2 Cleaning
8 Fault remedies
Commissioning report
Information for the owner of the
heat pump heating system
Keep these operating instructions safely and
pass them on to any new user, should the
equipment change hands. Let your contractor
check their content in conjunction with
required maintenance or repair work.
Risk of injury
Where children or persons with
limited physical, sensory or mental
capabilities are to be allowed to control this
appliance, ensure that this will only happen
under supervision or after appropriate
instructions by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.
2
2
2
2
2
2
2
3
3
4
5
6
6
6
6
7
7
7
9
9
9
9
10
10
11
12
12
13
17
17
17
17
17
18
19