Warningindicatorsand Messages - Sony HANDYCAM DCR-HC26 Operating Manual

Digital video camera recorder
Hide thumbs Also See for HANDYCAM DCR-HC26:
Table of Contents

Advertisement

Warningindicatorsand messages
76
If indicators appear on tile LCD screen ur in
the viewfinder, check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your SoW
dealer or local authorized Sony service
facility.
C:(or E:) DD:DD
(Self-diagnosis
display)
C:04:r-lr-I
• The batte15.., pack is not an
"InfoLITHIUM" battery pack. Use an
"InfoLITHIUM" battery pick (p. 81 ).
• Connect the DC plug of the AC
Adaptor to the DC IN jack of your
camcorder securely (p. 12).
C:21:DD
• Moisture condens ition has occurred.
Remove the cassette and leave your
camcorder for at least 1hour, Iben re-
insert the cassette (p. 84).
C:22:r-lr-I
• Clean the head using a cleaning
cassette (optional) (p. 84).
C:31 :r-lr-I / C:32:F-ID
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perRmn Ihis procedure if
moisture condensation has occurred
(p. 84).
• Remove the power source. Reconnect it
and operate yo/ir camcorder
again.
• Change the cassette. Press RESET
(p. 27), and operate your camcorder
again.
E:61 :r-wI / E:62:r-lr-I
• Contact )our Son) de:llcr or local
authorized Sony service facility, lnlbrm
them of the 5-digit code, which starts
fron/
E."
_\_ (Battery
level warning)
• The batter,, pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, (-\_
may flash, even if there are
approximately 5 to 10 minutes
remaining.
[] (Moisture
condensation
warning)*
• t_jcct the cassette, remove the power
source, and then leave it R)rabout 1
hour with the cassette lid open (p. 84).
Ld%(Warning
indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted7
• The write-protect tab on the cassette is
set to lock (p. 80).*
Fast flashing:
• The tape has run otlt.*
_-- (Eject
cassette
warning)*
Slow
flashing:
• The write-protect
tab on the cassette
is
set to lock (p. 80).
Fast flashing:
• Moisture
condensation
has occurred
(p. 84).
• The self-diagnosis
display code is
displayed
(p. 76).
* You hear a melody when lhe warning indicalors
appez,r on lhe screen (p. 48).

Advertisement

Table of Contents
loading

Table of Contents