Connectionof Speakers(Kr-897) - Kenwood KR-897 Instruction Manual

KR-Sg7/KR=797 (En}
Connectionof s eakers KR-897 I
Center speaker Powerd
(SQ ~ 16_) sub-woofer
Speaker system A
(8.Q~ 16Q)
• I *Connectthespeakersforusein
surround play to speaker sys-
tem A.
Speaker system B does not out-
putsound during surround play.
i
°. _.
Speaker system B
(8_ ~ 16_)
R L
Surround speakers
(4_ ~ 8Q)
%
.1 Power amplifier
KM-897
.1 For the operation of the
power amplifier (KM-897),
refer to the instruction
manual of the power am-
plifier (KM-897).
O Push lever.
O Insert cord.
(_ Return lever.
The speakers connected to the KR-897 and
KM-897 reproduce sound as described below.
When surround play is used: Speakers used for reproduction
KR-897 SPEAKERS key: ON : Speaker system A/Sub-woofer
KM-897 Key: J_ SURROUND : Center speaker/Surround speakers
Stereo play using the KR-897: Speakers used for reproduction
KR-897 SPEAKERS key: ON : Speaker system A/Sub-woofer
KM-897 POWER key: ["1OFF ;
Stereo play using the KM-897: Speakers used for reproduction
KR-897 SPEAKERS key: OFF :
KM-897 Key: _ STEREO : Speaker system B
HEADPHONES play using only: Speakers used for reproduction
KR-897 SPEAKERS key: OFF :
KM-897 POWER key: 17 OFF :
• For the installation and adjustment of speakers for surround play -_
• Never short-circuit the + and - speaker cords. Eor the symptom and remedy when a speaker cord is shorted. -_
• If the left and right speakers are connected inversely or if the speaker cords are connected with reversed pelarity, the sound becomes unnatural with
ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
eConnect a sub woofer if you want to enhance the bass sound The connected sub-woofer should be a power sub-woofer with a built-in amp