Installation; Scope Of Delivery; Basic Principles Of Installation; Requirements Of The Measurement Location - Xylem wtw MIQ/R6 Operating Manual

MIQ/R6
3
3.1
 MIQ module
 Accessory set, including:
 Accessory kit, including
 Operating manual.
3.2

3.2.1 Requirements of the measurement location

The measurement location must meet the environmental conditions specified in
section 6.1 G
Controlled Work on the open instrument (e.g. during mounting, installation, maintenance)
environmental may only be carried out under controlled environmental conditions:
conditions
Temperature
Relative humidity
3.3
Electrical equipment (e.g. motors, contactors, cables, lines, relays) must meet
the following requirements:
 Conformity with national regulations (e.g. NEC, VDE and IEC)
 Suitability for the electrical conditions at the installation site
 Suitability for the environmental conditions at the installation site
ba75541d07 03/2018
All manuals and user guides at all-guides.com

Installation

Scope of delivery

– 4 x cable glands (clamping range 4.5-10 mm) with seals and blind plugs
– 4 x ISO blind nuts M4 with suitable cheese-head screws and plain wash-
ers
– 2 x countersunk screws M3x6 to close the module lid
(+ 2 replacement screws)
– 1 x contact base with fixing screws
– 1 x extension M16x1.5 to M20x1.5 with O-ring
– 1 x cable gland

Basic principles of installation

.
ENERAL DATA

Safety requirements on the electrical installation

– Maximum operating voltage
– Maximum operating current
+ 5 °C ... + 40 °C (+ 41 ... +104 °F)
≤ 80 %
Installation
9