Safe Operation; Authorized Use; Requirements For Safe Operation; Unauthorized Use - Xylem wtw MIQ/R6 Operating Manual

Safety instructions
2.2

2.2.1 Authorized use

The authorized use of the MIQ/R6 consists of providing relay outputs in the
IQ S
and technical specifications given in this operating manual is authorized (see
chapter 6 T

2.2.2 Requirements for safe operation

Note the following points for safe operation:
 The product may only be operated according to the authorized use specified
 The product may only be operated under the environmental conditions men-
 The product may only be supplied with power by the energy sources men-
 The product may only be opened if this is explicitly described in this operating

2.2.3 Unauthorized use

The product must not be put into operation if:
 it is visibly damaged (e.g. after being transported)
 it was stored under adverse conditions for a lengthy period of time (storing
2.3
Target group The IQ S
nance activities, e.g. changing the membrane caps in D.O. sensors, require the
safe handling of chemicals. Thus, we assume that the maintenance personnel
is familiar with the necessary precautions to take when dealing with chemicals
as a result of their professional training and experience.
Special user The following installation activities may only be performed by a qualified electri-
qualifications cian:
 Connection of the MIQ/R6 to the power supply.
 Connection of external, line voltage-carrying circuits to relay contacts (see
8
All manuals and user guides at all-guides.com

Safe operation

N . Only the operation and running according to the instructions
ENSOR ET
). Any other use is considered unauthorized.
ECHNICAL DATA
above.
tioned in this operating manual.
tioned in this operating manual.
manual (example: connecting electrical lines to the terminal strip).
conditions, see chapter 6 T

User qualification

N system was developed for online analysis. Some mainte-
ENSOR ET
module manual of the relay output module).
).
ECHNICAL DATA
ba75541d07
MIQ/R6
03/2018