Carrier AirStream 42WKN08-36 Installation, Operation And Maintenance Instructions page 41

SWING INDICATOR
Indicates air vane
operation (medium and
large cassette untis
only)
OFF
Press to turn
unit off.
SELECT
Press to set clock or timer.
Press ON/SEND to send
new setting to thermostat.
ON/SEND
Press to turn unit
on and/or update
settings.
LED NAME
On ON
On OFF
Timer Blinking
Timer and On Blinking synchronous
Fig. 35 — Infrared Transmitter
LED STATE
ON
OFF
• Timer ON
• Power returned after break while Timer was active
• Fault F1 indication — error with unit mounted return air sensor
• Fault on T4,0 input (input was opened for more than
10 seconds)
— Condensate high level
— Freeze stat alarm
Fig. 36 — Infrared Receiver
41
CLOCK
TIMER
TEMPERATURE
FAN SPEED
MODE INDICATOR
+, —
Press to adjust temperature
setpoint. Press ON/SEND to send
new setting to thermostat.
FAN
Press to change fan speeds
(high, medium, low, auto).
Press ON/SEND to send
new setting to thermostat.
MODE
Press to change modes
(cool, heat, auto change-over,
fan only). Press ON/SEND to send
new setting to thermostat.
SYSTEM STATE