4.1.3
Power-down instruction:
•
•
4.2
Jumper positions
4.2.1
Default settings
There are only two jumpers in the ROA 128 3835 board - one for the SYNC
and one for CTRL. The factory default jumper positions are the shown in
figure below. The jumper positions are described furthermore in next
section
Figure 4.1: Factory default jumper settings of ROA 128 3835
User guide evaluation board BMR45x
Turn RC switch(es) in Off position or turn Off the 48V Supply
Now the BMR modules can be removed/replaced
2023-12-05
9 (14)