User Guide; Power Up/Down Instructions; Power Supply Connection - Flex ROA 128 5068 User Manual

ROA 128 5068
POL SIP Evaluation Board
1
1.1
1.1.1

User Guide

Power Up/Down Instructions

This section of the document describes how to connect power supply for
different cases in order to avoid mistake during measurements.

Power Supply Connection

Connect 5-14V DC power to the "+IN and "-IN"" connectors (see Fig 1.1).
Fig 1.1 Connect 5-14V to either of the "+IN"and "-IN" DC power connectors located in
both ends of the board (see blue rectangles).
Fig 1.2 shows the RC switch in "On" position.
SW1
User Guide
1/28701-ROA 128 5068 Rev A
© Flex
Fig 1.2 the RC switch in "On" position.
3
May 2018